Hot Water Bath

Hot Water Bath:

OVERVIEW

Product:

Hexa Plast ‘ s Bath are Different Designed to heat faster with low energy cost and maintain the temperature for longer time.
To Maintain the temperature in to the bath circulation is done by either one 0r two pumps Or Motor as depending on the volume of bath.

Temperature is controlled by Auto Tune PID Controller.

In Large Size of Bath Hexa Gives Separate bath for heating and hot water is circulated to the other chamber so as to save the energy cocost.

Hot Water Bath are Used for long & Short Term Hydrostatic Pressure test of pipes.

These bath are made as per International Standards to provide the Heating Media to The Product.

Usp:

“Hexa” baths are uniquely designed to heat faster with low energy cost and to maintain the temperature for longer time. To maintain the temperature into the bath circulation is done by either one or two pumps as depending on the volume of bath.

Temperature is controlled by microprocessor based controllers. In large size bath “Hexa” gives separate bath for heating & the hot water is circulated to the other chamber so as to save the energy cost.

Hot and Cold water Baths are used for long & short term Hydrostatic Pressure test of pipes. These bath are made as per international standards to provide the heating & cooling media to the product.

Application:

As plastics are affected by the temperature, Hydrostatic Pressure tests for HDPE, R-PVC, C-PVC, U-PVC, MDPE and lateral pipes test specimens are suppose to be tested either at room temperature, at higher temperature or lower temperature in water bath as per national & international standards

Size	1220 X 760 X 460 mm. ( Inner Size) & As per Requirement.
Temp. Range.	Ambient To 100 o C.
Resolution.	0.1 o C.
Accuracy .	+/- 0.5 %
Material Construction	Inner S.S. & Outer M.S. With Powder Coated Or Paint.
Power Supply	415 V , 3 Phase , 50 HZ.

Hot Water Bath & Cool Water Bath:

Size	Customized
Temp. Range	Ambient to 95°c & Ambient to 05°c
Resolution	0.1°c
Accuracy	+/- 0.5%
Material Of Construction	Inner S.S. & Outer M.S/S.S with Power Coated or Paint
Power Supply	415V, 3 Phase, 50 Hz.

1 – Are you a manufacturer or trader?

We are a manufacturer of testing equipment and we have international standard infrastructure to support this manufacturing. Please refer about page to see our manufacturing facility.

2 – Are your products compliant with industry standards and regulations?

We manufacture and facilitate our products in domestic and international market by exporting to more than 50 countries.

3 – Do you offer equipment maintenance and calibration services?

Yes, we do offer maintenance and calibration service. Please contact our service team for further guidance.

4 - Are you able to supply customized equipment for testing?

Yes, we extend our self to help our customers to fulfill their requirements by providing customization if require and also, we do have many specialized products in our portfolio.